DIAMENTOR E2
Electromagnetic Compatibility (EMC) according to IEC 60601-1-2
D651.131.00/05 en
31
Recommended separation distances between portable and mobile RF communications equipment and
the DIAMENTOR E2
The DIAMENTOR E2 is intended for use in an electromagnetic environment in which radiated RF distur-
bances are controlled. The customer or the user of the DIAMENTOR E2 can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the DIAMENTOR E2 as recommended below, according to the maximum output power of
the communications equipment.
Rated maximum out-
put power of transmit-
ter (W)
Separation distance according to frequency of transmitter
(m)
150 kHz to 80 MHz
d
=
P
V
1
5
.
3
= 1.2
P
80 MHz to 800 MHz
d
=
P
E
1
5
.
3
= 1.2
P
800 MHz to 2.5 GHz
d
=
P
E
1
7
= 2.3
P
0.01
0.12 0.12 0.23
0.1
0.38 0.38 0.73
1
1.2 1.2 2.3
10
3.8 3.8 7.3
100
12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d
in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where
P
is
the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorp-
tion and reflection from structures, objects and people.
