8
4.6 horizontal SySteMS:
In applications where the Rebel SRL is used in conjunction with a horizontal
system (i.e. Horizontal Lifeline, Horizontal I-Beams Trolley), the horizontal systems must be designed and
installed under the supervision of a qualified engineer. SRL and horizontal system components must be
compatible. Consult the horizontal system equipment manufacturer’s instructions for details.
5.0 InspEctIon
5.1 inSPection FreQuency:
The Rebel SRL must be inspected at the intervals defined in “
Section 2.5 -
Inspection Frequency”
. Inspection procedures are described in the
“Inspection Checklist”
(Table 2).
5.2 unSaFe or DeFective conDitionS:
If inspection reveals an unsafe or defective condition, If
inspection reveals an unsafe condition, remove the SRL from service, mark
“UNUSABLE”
and send to an
authorized service center for repair
.
5.3 ProDuct liFe:
The functional life of Rebel SRLs is determined by work conditions and maintenance. As
long as the SRL passes inspection criteria, it may remain in service.
6.0 maIntEnancE, sErVIcInG, and storaGE
6.1 cleaning:
Cleaning procedures for the Rebel SRL are as follows:
• Periodically clean the exterior of the SRL using water and a mild soap solution. Position the SRL so
excess water can drain out. Clean labels as required.
• Clean the Web Lifeline with water and mild soap solution. Rinse and thoroughly air dry. Do not force dry
with heat. The lifeline should be dry before allowing it to retract into the housing. An excessive buildup
of dirt, paint, etc. may prevent the lifeline from fully retracting back into the housing causing a potential
free fall hazard.
Important:
If the lifeline contacts acids or other caustic chemicals, remove the SRL from service
and wash with water and a mild soap solution. Inspect the SRL per Table 2 before returning to
service.
6.2 Service:
Rebel SRLs listed within this instruction are repairable. If the SRL has been subjected to
fall force or inspection reveals an unsafe or defective condition, remove the SRL from service, mark
“UNUSABLE”
and send to an authorized service center for repair
.
6.3 Storage anD tranSPort:
Store and transport the SRL in a cool, dry, clean environment
out of direct sunlight.
Avoid areas where chemical vapors may exist. Thoroughly inspect the SRL after any period of extended
storage.
7.0 spEcIFIcatIons
7.1 PerForMance:
Your Rebel SRL has been tested and certified to the performance requirements of
the standard(s) identified on the cover of this instruction manual. See
“Section 2.0 - Limitations &
Requirements”
for performance specifications.
7.2 MaterialS:
Material specifications for the Rebel SRL are as follows:
housing:
Nylon, UV Resistant
Motor Spring:
Stainless Steel
Drum:
Nylon, Type 6/6, Glass Filled
Swivel:
Zinc Plated Steel
Fasteners:
Zinc Plated Steel Screws; Stainless
Steel Rivets
lifeline:
Polyester Web
locking Pawls:
Stainless Steel
energy absorber
Cover: PVC Tubing
Web: Polyester
Main Shaft:
Stainless Steel
Содержание Rebel 3100423
Страница 3: ...8 3 3m 11 ft 6 0m 20 ft 3 ...
