4
WARNING:
This product is part of a personal fall arrest, work positioning, or rescue system. The user must follow the
manufacturer’s instructions for each component of the system. These instructions must be provided to the user of this
equipment. The user must read and understand these instructions before using this equipment. Manufacturer’s instructions
must be followed for proper use and maintenance of this equipment. Alterations or misuse of this product or failure to follow
instructions may result in serious injury or death.
IMPORTANT:
If you have questions on the use, care, or suitability of this equipment for your application, contact Capital
Safety.
IMPORTANT:
Before using this equipment, record the product identification information from the ID label in the inspection
and maintenance log of this manual.
GLOSSARY REFERENCES
Numbered Glossary References on the front cover of this instruction reference the following items:
1
User Instructions.
4
Standards.
2
Rebel™ Self Retracting Lifelines.
5
Number of body that performed CE test.
3
Model Numbers:
(See Figure 1).
6
Number of body checking the manufacture of this PPE.
descRIPTIONs:
Rebel SRLs are 3.3m (11 ft) and 6.0m (20 ft) Self Retracting Lifelines, equipped with an in-line Energy Absorber,
which retract into a Thermoplastic Housing. Rebel SRLs are available in several model configurations that allow
attachment to an anchorage point (see Figure 1). The Rebel SRL automatically locks at the onset of a fall to arrest
the fall, but pays out and retracts lifeline during normal movement by the attached user.
Figure 2 illustrates key components of Rebel SRLs:
A
Swivel
B
Swivel Eye
C
Carabiner
D
Housing
E
Web Lifeline
F
Energy Absorber
G
Snap Hook
1.0 APPLIcATIONs
1.1 PURPOSE:
Capital Safety Self Retracting Lifelines (SRLs) are designed to be a component in a personal
fall arrest system (PFAS). Figure 1 illustrates SRLs covered by this instruction manual and their typical
applications. They may be used in most situations where a combination of worker mobility and fall protection
is required (i.e. inspection work, general construction, maintenance work, oil production, confined space
work, etc.).
1.2 StANDARDS:
Your SRL conforms to the national standard(s) identified on the front cover of these
instructions.
1.3 tRAiNiNG:
This equipment is intended to be used by persons trained in its correct application and use. It is
the responsibility of the user to assure they are familiar with these instructions and are trained in the correct
care and use of this equipment. Users must also be aware of the operating characteristics, application limits,
and the consequences of improper use.
2.0 LIMITATIONs & RequIReMeNTs
Always consider the following limitations and requirements when installing or using this equipment:
2.1 CAPACitY:
SRLs are designed for use by one person with a combined weight (person, clothing, tools, etc.)
not exceeding 140 kg (310 lbs) and at least 34 kg (75 lbs).
At no time shall more than one person connect to a single SRL for fall arrest applications.
2.2 MAxiMUM ARRESt FORCE AND MAxiMUM ARRESt DiStANCE:
SRLs documented in this instruction
meet the following Arrest Force maximums:
Weight of Worker
Up to 140 kg (310 lbs)
Average Arresting Force
4.0 kN (900 lbs)
Maximum Arresting Force
6.0 kN (1,350 lbs)
2.3 ANCHORAGE:
Anchorage structure for the SRL must be capable of supporting loads up to 12 kN (2,700 lbs).
Anchor devices must conform to EN795.
2.4 RESCUE PLAN:
When using this equipment, the employer must have a rescue plan and the means at hand
to implement it and communicate that plan to users, authorized persons, and rescuers.
EN
Содержание Rebel 3100423
Страница 3: ...8 3 3m 11 ft 6 0m 20 ft 3 ...
