RLXIC-EH
♦
Intelligent Cellular
Configuration Commands
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
User Manual
Page 80 of 111
ProSoft Technology, Inc.
May 29, 2009
OPRG=n
Enables/disables over-the-air firmware upgrading of the RLXIC-EH. When
ProSoft Technology releases a new version of ALEOS, you can upgrade your
remote modems with OPRG enabled.
n=0
: Disables
n=1
: Enables
*NETPHONE?
The modem's phone number, if applicable or obtainable.
*DPORT=n
The modem's Device Port which the modem is listening on for inbound
packets/data/polls. Can also be set with the command S110.
n=1-65535
*NETUID=uid
The login that is used to login to the cellular network, when required.
uid=user id
(up to 64 bytes)
*NETPW=pw
The password that is used to login to the cellular network, when required.
pw=password
(30 characters maximum)
*NETALLOWZEROIP=n
Allows the displayed IP address in *NETIP to end in zero (ex. 192.168.1.0).
n=0
: Do not allow.
n=1
: Allow.
*HOSTPAP=n
Use PAP to request the user login and password during PPP negotiation on the
host connection.
n=0
: Disable PAP request (Default).
n=1
: Takes user login and password from Windows DUN connection, and
copies to *NETUID and *NETPW.
S53=[method][d.d.d.d][/ppppp]
Destination IP address, port, and method. These are used as defaults for the D
(Dial) AT command.
method= P
: UDP
method=T
: TCP
method=N
: Telnet
Содержание RLXIC-EH
Страница 4: ......