RLXIC-EH
♦
Intelligent Cellular
Configuring your RLXIC-EH
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
User Manual
Page 36 of 111
ProSoft Technology, Inc.
May 29, 2009
5.3.1 AT
Commands
When using a terminal application, you will need to manually type in each
command.
For most commands, when you are entering them using a terminal
connection, you will need to preface the command with AT (exceptions are
noted), that is,
ATA
which is listed as
A
.
Some commands have specific parameters while other commands will take
whatever you type.
Required variable parameters are denoted with italicized text, example, D
n
.
The
n
is variable.
Acceptable parameters and/or specific formats are listed with each
command.
Most commands with parameters can be entered with ? to read the current
value (for example,
AT&D?
will respond with "2" if the default has not been
changed).
Optional parameters are denoted with square brackets [ ].
AT Commands are not case sensitive. A capital "E" is the same as a lower-
case "e".
When you are using a terminal connection, if you enter a command which is
recognized by the RLXIC-EH, it will respond with "OK". If the command is not
recognized, the response will be "ERROR".
Those commands applicable only to certain model numbers of the RLXIC-EH
will be noted.
Caution:
Symbols listed with commands, such as
*
,
/
,
&
, or
?
, are part of the command and must
be included. Commands with symbols other than
*
may require PassThru mode.
Содержание RLXIC-EH
Страница 4: ......
