background image

IP Manager 

RLXIC-EH 

 Intelligent Cellular 

User Manual 

RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks 

 

 
ProSoft Technology, Inc. 

Page 63 of 111 

May 29, 2009 
 

Tip:

 A URL (Universal Resource Locator) is different from a domain name in that it also indicates 

information on the protocol used by a web browser to contact that address, such as www.prosoft-
technology.com. www.prosoft-technology.com is a fully qualified domain name, but the http://, the 
protocol identifier, is what makes the whole thing a URL. 

8.3 Dynamic 

Names 

When an IP address is not expected to change, the DNS server can indicate to 
all queries that the address can be cached and not looked up for a long period of 
time. Dynamic DNS servers, conversely, have a short caching period for the 
domain information to prevent other Internet sites or queries from using the old 
information. Because the IP address of a modem with a dynamic account can 
change frequently, if the old information was used (such as with a DNS server 
which indicates the address can be cached for a long period of time) when the IP 
address changed, the domain would no longer point to the new and correct IP 
address of the modem. 

If your RLXIC-EH is configured for Dynamic IP, when it first connects to the 
Internet, it sends a IP change notification to IP Manager. IP Manager will 
acknowledge the change, and update the Dynamic DNS server. The new IP 
address will then be the address for your modem's configured name. 

After your modem's IP address has been updated in IP Manager, it can be 
contacted via name. If the IP address is needed, you can use the domain name 
to determine the IP address. 

Note:

 The fully qualified domain name of your RLXIC-EH will be a subdomain of the domain used 

by the IP Manager server. 

8.4 

Using IP Manager with your RLXIC-EH 

To allow your RadioLinx modem to be addressed by name, the modem needs to 
have a minimum of three elements configured. You can also configure a second 
dynamic server as a backup, secondary, or alternate server. 

In AceManager, select 

D

YNAMIC 

IP

 

Содержание RLXIC-EH
















































































































Отзывы: