background image

RLXIC-EH 

 Intelligent Cellular 

Introduction to the RLXIC-EH 

RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks  

User Manual 

 

 
Page 8 of 111  

ProSoft Technology, Inc. 

May 29, 2009 

 

 

1.1 ALEOS™ 

ALEOS, the embedded core technology of the RadioLinx Intelligent Cellular 
products, simplifies installation, operation and maintenance of any solution, and 
provides an always-on, always-aware intelligent connection for mission-critical 
applications. ALEOS enables: 

ƒ

  Persistent Network Connectivity 

ƒ

  Over-The-Air (OTA) Upgrades 

ƒ

  Wireless Optimized TCP/IP 

ƒ

 Real-Time 

Notification 

ƒ

  Extensive Machine Protocols 

ƒ

  Packet Level Diagnostics 

ƒ

  Device Management & Control 

ƒ

 Protocol 

Spoofing 

1.2 AceWare™ 

A wireless solution is not complete until you have software tools to manage the 
devices monitoring your valuable equipment. AceWare™ is the device 
management and monitoring application suite for RadioLinx Intelligent Cellular 
products powered by ALEOS. 

These modem utilities, except AceNet, are free of charge to those who own 
Intelligent Cellular modems. You can download the applications and their user 
guides from the ProSoft Solutions web site: www.prosoft-technology.com. 
Contact your dealer or ProSoft Technology representative for information on 
AceNet. 

AceManager, the AceWare remote configuration and monitoring tool, simplifies 
deployment, and provides extensive monitoring, control and management 
capabilities. AceManager gives you the power to monitor and control your 
RadioLinx communications platforms in real time. 

Simplified Deployment 

AceManager provides the ability to remotely set up and configure your RadioLinx 
Intelligent Cellular products. Remote device setup and configuration reduces the 
deployment timeline of your wireless solution, and provides a quicker path to 
ROI. 

Templates allow you to easily configure other devices in your fleet with identical 
settings, ensuring a simple, accurate deployment. 

Monitor and Control 

AceManager allows an administrator to remotely monitor a modem's status, 
health, and configuration settings. The user interface displays signal strength, 
cell site information, byte counters, and error conditions, enabling you to locate 
any issues, and troubleshoot immediately. 

Содержание RLXIC-EH
















































































































Отзывы: