Configuration Commands
RLXIC-EH
♦
Intelligent Cellular
User Manual
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
ProSoft Technology, Inc.
Page 77 of 111
May 29, 2009
10.2 Status
Most of the commands in the "Status" group have read-only parameters, and
provide information about the modem. The Status Group has more fields that can
be displayed on most screens. You can either resize your window or use the
scroll bar on the side to display the remainder.
*NETIP?
Note:
If there is no current network IP address, 0.0.0.0 may be displayed.
The current IP address of the modem reported by the internal module, generally
obtained from your cellular provider. This is the address can contact the RLXIC-
EH from the Internet.
Tip:
Use *NETALLOWZEROIP if you need to allow the display of an IP ending in a zero.
*NETSTATE?
The current network state:
Connecting To Network:
The RLXIC-EH is in the process of trying to
connect to the cellular network.
Network Authentication Fail:
Authentication to the cellular network has
failed. Verify settings to activate the RLXIC-EH.
Data Connection Failed:
The RLXIC-EH failed to connect, and it is now
waiting a set time interval before it attempts to reconnect. Verify settings to
activate the RLXIC-EH.
Содержание RLXIC-EH
Страница 4: ......
