PRONAR ZKP350, Руководство по эксплуатации, Страница: 48 / 60

5.2
5.1 SAFE MAINTENANCE PRINCIPLES
•
Repair, maintenance and cleaning work should be carried out with the tractor's
engine switched off and the ignition key removed. Ensure that unauthorised
persons, especially children, do not have access to the tractor.
•
The machine must not be used when not in working order.
•
Repair work on the wheels or tyres should be carried out by persons trained
and entitled to do so. This work should be carried out using appropriately
selected tools.
•
In the event of work requiring the windrower to be raised, use properly certified
hydraulic or mechanical lifts for this purpose. After lifting the windrower, stable
and durable supports must also be used. Work must not be carried out under a
machine which has only been raised with a lift.
•
The windrower must not be supported using fragile elements (bricks or concrete
blocks).
•
When operating the machine wear protective gloves and use the appropriate
tools.
•
Servicing and repair work should be carried out in line with the general
principles of workplace health and safety. In the event of injury, the wound must
be immediately cleaned and disinfected. In the event of more serious injuries,
seek a doctor's advice.
5.2 REDUCTION GEAR OPERATION
Service of reduction gear is conducted during general inspection, change or topping up gear
oil. In the event of damage to reducer contact authorised service point in order perform
repairs.
First oil change must be made after the first 50 hours worked. The next oil change should be
made after 500 hours of windrower work or once a year. Most suitable time for changing
reduction gear oil is when preparing for first fieldwork. The quantity of oil necessary to fill the
reduction gear box amounts to 3.1 litres. Reduction gearing oil: SAE90EP.