PRONAR ZKP350 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 60

PRONAR ZKP350 Скачать руководство пользователя страница 41

4.9

The forming guard is the barrier for the raked swath. Thanks to the swath is formed into an

even windrow of the required width. When setting the guard observe the principle that the

greater the swath then the wider the working width, and the other way round, the lower the

quantity of swath then the barrier distance should be less.

FIGURE 4.3A

Setting side guards

(1) left guard arm, (2) locking linchpin, (3) right guard arm, (4) linchpin securing extended

arm, (5) extended arm

4.4.3 SETTING WORKING POSITION

The correct working position of windrower has a decisive influence on the cleanness of the

raked swath, quality of windrow forming and working comfort.

One of the basic factors deciding the correctness of machine setting is the correct height

regulation of the lower three-point linkage tractor lift arms. Their height is regulated by the

suspender rods. Both the lift arms must be at the same height, if not the windrower may be

tilted to the left or the right side. This must be done before connecting windrower to the

tractor.

«
...
39
40
41
42
43
...
»

Содержание ZKP350





























































Отзывы:

Нет отзывов