PRONAR ZKP350 Скачать руководство пользователя страница 23

 

2.7

 

not keeping a safe distance from the danger zone or being within the zones 

while the windrower is operating, 

 

operation of the windrower by persons under the influence of alcohol, 

 

cleaning, maintenance and technical checks of the windrower. 

 

using unreliable articulated telescopic shaft. 

The minimal risk may be kept to a minimum by following the recommendations below: 

 

prudent and unhurried operation of the machine, 

 sensible 

application 

of the remarks and recommendations contained in the 

operating instructions, 

 

keeping a safe distance from forbidden or dangerous places, 

 

a ban on being on the machine when it is operating, 

 

carrying out repair and maintenance work in line with operating safety 

principles, 

 

carrying out repair and maintenance work by persons trained to do so, 

 

using strictly suited protective clothing, 

 

ensuring unauthorised persons have no access to the machine, especially 

children. 

2.4

 

INFORMATION AND WARNING STICKERS 

The windrower is labelled with the information and warning stickers mentioned in table (

2.1)

The symbols are positioned as presented in figure

 (2.1A).

 Throughout the time it is in use, the 

user of the machine is obliged to take care that notices and warning and information symbols 

located on the windrower are clear and legible. In the event of their destruction, they must be 

replaced with new ones. Stickers with notices and symbols are available from the 

manufacturer, or from the retailer where the windrower was purchased. New assemblies, 

changed during repair, must be labelled once again with the appropriate safety signs. 

 

 

Содержание ZKP350





























































Отзывы: