PRONAR ZKP350, Руководство по эксплуатации, Страница: 38 / 60

4.6
•
Reversing the tractor bring the lower three-point linkage connection points (A) and (B)
close to pins (1) and (2) of windrower.
•
Set connection arms (A) and (B) of tractor at appropriate height.
•
Switch off tractor's engine and prevent it from rolling.
•
Connect lower pins (1) and (2) with connecting arms (A) and (B) and lock with the aid
of linchpins.
•
Release top link of tractor and connect it with pin (3) of windrower and lock with
linchpin.
•
Raise support (4) and secure with linchpin.
ATTENTION!
Before using the windrower, the user must thoroughly familiarise himself with the
tractor's operating instructions.
The lower connection arms must at identical height. If not the windrower shall be tilted to
the left or right side, which will interfere with the machine's operation. Appropriate
regulation is made with the aid of the tractor lower three-point linkage suspender rods.
DANGER
Exercise caution when linking the machine.
The top link pin must be in the upper socket of the hitching system, if the windrower is
prepared for field work – in working position. To transport the windrower use the lower socket
– transport position – compare with figure ( 3.2A ).
4.4 PREPARATION OF WINDROWER FOR WORK
Windrower transported to the field must be set in appropriate working position. Preparing of
the machine for work must only take place exclusively where the windrower shall work.
Travel of machine on roads with raking arms installed and extended guards is forbidden.