PRONAR ZKP350, Руководство по эксплуатации, Страница: 20 / 60

2.4
•
The chains preventing the shaft cover from turning while the shaft is working,
shall be secured to a fixed element of windrower structure.
•
Do NOT use the securing chains to support the shaft while machine is parked or
when transporting the windrower.
•
Before using the windrower the user should thoroughly acquaint himself with the
articulating telescopic shaft instructions and adhere to the recommendations
contained in them.
•
The windrower may only be connected to the tractor with the aid of the
appropriatly selected articulated telescopic shaft recommended by the
Manufacturer.
•
The driveshaft must be equipped with a cover. Do NOT use the shaft with
damaged or missing guards.
•
After connecting shaft ensure that it is correctly and safely connected to the
tractor and to the windrower.
•
Before starting the windrower make sure that there are no bystanders
(especially children) or animals in the danger zone. The machine operator is
obliged to ensure proper visibility of the machine and the working area.
•
While windrowing apply working speed recommendations.
•
When using the windrower and power takeoff shaft, do not use PTO rotation
speed greater than 540 revs/min. Do NOT overload shaft and windrower and
also engage the clutch suddenly. Before starting articulated telescopic shaft
make certain that the PTO shaft rotation direction is correct.
•
During windrowing use the correct working position.
•
Before disconnecting the shaft, turn off the tractor engine and remove the key
from the ignition.
•
When working on the tyres, wedges or other objects without sharp edges
should be placed under the wheels of the windrower to prevent it from rolling.
•
Repair work on the wheels or tyres should be carried out by persons trained
and entitled to do so. This work should be carried out using appropriately
selected tools.