PRONAR ZKP350 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 60

PRONAR ZKP350 Скачать руководство пользователя страница 46

4.14

•

disconnect lower windrower pins and drive tractor away.

4.8

PREPARATION OF WINDROWER FOR TRANSPORT

After finishing fieldwork the windrower must be set in transport position. Before beginning

preparation works switch of tractor engine and remove the key from the ignition. Brake tractor

with parking brake and secure tractor cab, ensure that unauthorised persons do not have

access to the tractor.

Travel with rake arms extended in work position is forbidden. During travel they must be

placed in sockets on frame and secured with linchpins.

Side guards shall be raised to vertical position and also secured with linchpins. It is

recommended that forming guard arm is totally retracted.

Disconnection of articulated telescopic shaft is not essential but it is recommended. Turning

sharp corners, especially in field conditions may be hindered because of this. If the shaft is

not taken off, is essential to remember not to engage the PTO drive of the tractor during

transport travel.

During transport the windrower must be raised by the three-point linkage.

DANGER

Preparing the windrower for transport may only be done with tractor engine switched off.
Remove the key from the ignition, ensure that unauthorised persons do not have access

to the tractor. Tractor shall be immobilised with parking brake.
Do NOT drive on public roads when visibility is limited.

«
...
44
45
46
47
48
...
»

Содержание ZKP350





























































Отзывы:

Нет отзывов