PRONAR ZKP350, Руководство по эксплуатации, Страница: 16 / 60

1.8
vehicle. During reloading work, particular care should be taken not to damage parts of the
windrower's fittings or the paint coat.
1.6 ENVIRONMENTAL HAZARDS
A hydraulic oil leak from the reducer constitutes a direct threat to the natural environment
owing to its limited biodegradability. While carrying out maintenance and repair work which
involves the risk of an oil leak, this work should take place on an oil resistant floor or surface.
In the event of oil leaking into the environment, first of all safeguard the source of the leak,
and then remove the leaked oil using available means. Remaining oil should be removed
using sorbents, or by mixing the oil with sand, sawdust or other absorbent materials. The oil
pollution, once gathered up, should be kept in a sealed, marked, hydrocarbon resistant
container, and then passed on to the appropriate oil waste recycling centre. The container
should be kept away from heat sources, flammable materials and food.
Oil which has been used up or is unsuitable for further use owing to a loss of its properties
should be stored in its original packaging in the conditions described above.
1.7 WITHDRAWAL FROM USE
Should the user decide to withdraw the machine from use, the entire windrower should be
taken to a scrap yard. When spare parts are changed, worn out or damaged parts should be
taken to a collection point for recyclable raw materials. Hydraulic oil should be taken to the
appropriate facility dealing with the re-use of this type of waste.