PRONAR PWP900 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 74

PRONAR PWP900 Скачать руководство пользователя страница 52

PRONAR PWP900

SECTION 4

4.14

4.4.2 WORKING POSITION ADJUSTMENT

The correct working position of the tender has a decisive influence on the quality of the

tedding and on working comfort.

One of the basic factors deciding the correctness of machine setting is the correct height

adjustment of the lower three-point linkage tractor lift arms. Their height is adjusted by the

suspender rods. Both the lift arms must be at the same height, if not the tedder may be tilted

to the left or the right side. This must be done before connecting tedder to the tractor.

ATTENTION

Read the instructions on adjustment of the three-point linkage, which are part of the
tractor operator's manual.

FIGURE 4.8

Work with tedder – rotor inclination angle (spreading angle)

(

α

) spreading angle, (A) large spreading angle, (B) small spreading angle, (C) normal

spreading angle, (D) sleeve setting in openings

DANGER

Adjustment of tedder's working height and swath spreading angle must be done with the
tractor engine turned off. Remove the key from the ignition, ensure that unauthorised
persons do not have access to the tractor. Tractor shall be immobilised with parking
brake.

«
...
50
51
52
53
54
...
»

Содержание PWP900











































































Отзывы:

Нет отзывов