PRONAR PWP900 Скачать руководство пользователя страница 13

Страница: 13 / 74

SECTION 1

PRONAR PWP900

1.3

1.2

PURPOSE

PRONAR PWP900 rotary tedder is designed according to current safety requirements and

engineering standards.

Rotary tedder is designed for agricultural work: tedding cut swaths (straw, grass, hay) on

stone-free grassland with a level surface. Do NOT use the machine for any other purpose.

Transporting people, animals or other materials is prohibited and regarded as contrary to the

intended purpose. During the use of the machine comply with all road traffic regulations and

transport regulations in force in the given country, and any breach of these regulations is

regarded by the Manufacturer as use contrary to its intended purpose.

ATTENTION

The rotary tedder must not be used for purposes other than those for which it is
intended, in particular:

•

for transporting people and animals,

•

for transport of whatever materials or objects.

Using it as intended involves all actions connected with the safe and proper operation and

maintenance of the machine. Due to the above, the user is obliged to:

•

carefully read the OPERATOR'S MANUAL and comply with its recommendations,

•

understand the machine's operating principle and how to operate it safely and

correctly,

•

adhere to the established maintenance and adjustment plans,

•

comply with general safety regulations while working,

•

prevent accidents,

•

comply with the road traffic regulations and transport regulations in force in a

given country, in which the machine is used,

•

carefully read the operator's manuals for the tractor and the PTO shaft and

adhere to the recommendations contained in these documents.

Содержание PWP900











































































Результаты поиска

Содержание PWP900

Отзывы:

PRONAR PWP900, Руководство оператора, Страница: 13 / 74

Результаты поиска

Содержание PWP900

Отзывы: