PRONAR PWP900, Руководство оператора, Страница: 48 / 74

PRONAR PWP900 SECTION 4
4.10
•
Raise the tedder's right and left modules until the cylinders are locked by the
mechanical interlock (2).
•
Set the tractor's hydraulic manifold lever for controlling the tipping cylinders in
NEUTRAL position.
•
Set the valve (1) of cylinders for tipping the tedder's modules in "CLOSED"
position.
•
Set the tedder's shock absorbers in the locked position (FIGURE 4.7).
•
During transport, the PTO shaft should be disconnected from the tractor PTO
shaft.
•
Raise the tedder above the ground using the three point linkage to the height
suitable for transporting the tedder.
DANGER
When preparing the tedder to transport, check if the mechanical interlocks of the tipping
cylinders are properly engaged and if the hydraulic valve of these cylinders is in
CLOSED position.
DANGER
The drive of the tractor's PTO must not be turned on when the rotary tedder is in its
transport position.
During transport, the PTO shaft should be disconnected from the tractor PTO shaft.