PRONAR PWP900, Руководство оператора, Страница: 43 / 74

SECTION 4 PRONAR PWP900
4.5
In order to hitch the rotary tedder to the tractor's rear three-point linkage, adhere to the
following guidelines (FIGURE 4.1):
•
While reversing the tractor, bring the lower links (A) and (B) of the tractor's three-point
linkage close to lower pins (1) and (2) of the tedder.
•
Set links (A) and (B) of tractor at appropriate height.
•
Switch off tractor's engine and prevent tractor from unintentional moving.
DANGER
Before hitching the tedder to the tractor, turn off the tractor's engine and remove the key
from the ignition. Ensure that unauthorised persons do not have access to the tractor.
•
Connect lower pins (1) and (2) with connecting arms (A) and (B) and lock with the aid
of cotter pins.
ATTENTION
The lower links must be at identical height. If not the tedder shall be tilted to the left or
right side, which will interfere with the machine's operation. Appropriate adjustment is
made with the aid of the tractor lower three-point linkage suspender rods.
•
Unlock the tractor's top link and connect it with the tedder's pin (3) and lock with a
cotter pin.
•
Connect the tractor's rear PTO with the tedder's main transmission by means of the
PTO shaft (8);
DANGER
Turn off the tractor's engine and remove the key from the ignition before connecting the
tractor's rear PTO with the PTO shaft. Ensure that unauthorised persons do not have
access to the tractor.
The use of PTO shaft and its technical condition must be in accord with the Operator's
Manual of PTO shaft.
DANGER
Before the first use, adjust the length of PTO shaft according to the recommendations of
the PTO shaft Operator's Manual.