
PRONAR PWP900
SECTION 2
2.4
•
In the event of injuries being caused by pressurised hydraulic oil, contact a doctor
immediately. Hydraulic oil may find its way under the skin and cause infections. In
the event of contact of oil with eye, rinse with large quantity of water and in the
event of the occurrence of irritation consult a doctor. In the event of contact of oil
with skin wash the area of contact with water and soap. Do NOT apply organic
solvents (petrol, kerosene).
•
Use the hydraulic oil recommended by the Manufacturer. Never mix two types of
oil.
•
Do not store hydraulic oil in packaging designed for storing food or foodstuffs.
•
Rubber hydraulic lines must be replaced every 4 years regardless of their technical
condition.
•
Repair and replacement of hydraulic system elements should be entrusted to the
appropriately qualified persons.
2.1.4 TRANSPORTING THE MACHINE
•
When driving on public roads, comply with the road traffic regulations in force in the
country in which the machine is used.
•
Do not exceed the permitted speed arising from road conditions and design
limitations. Adjust travel speed to the prevailing road conditions and other
limitations arising from road traffic regulations limits.
•
Before beginning travel, the tedder must be placed in transport position and raised
using the rear three-point linkage system.
•
When preparing the tedder to transport, check if the mechanical interlocks of the
tipping cylinders are properly engaged and if the hydraulic valve of these cylinders
is in CLOSED position.
•
Do NOT leave the tedder raised while the tractor is parked. When parked, the
tedder should be lowered.
•
The tedder transported on the tractor must not be set in its working position.
•
The tedder may not be used or transported in conditions of limited visibility.
•
Do NOT ride on the machine or transport any materials on it.
Содержание PWP900
