
SECTION 2
PRONAR PWP900
2.5
•
Before using the machine always check its technical condition, especially in terms
of safety. In particular, check the technical condition of the linkage and connection
elements of the hydraulic system.
•
Do NOT leave tractor driver's seat when the tractor is moving.
•
Reckless driving and excessive speed may cause accidents.
2.1.5 MAINTENANCE
•
During the warranty period, any repairs may only be carried out by Service
authorised by the manufacturer. It is recommended that necessary repairs to
machine should be undertaken by specialised workshops.
•
In the event of any fault or damage, do not use the machine until the fault has been
corrected. The machine must not be used when not in working order.
•
During work use the proper, close-fitting protective clothing, gloves and appropriate
tools. When working on hydraulic systems it is recommended to use oil resistant
gloves and protective goggles.
•
Any modification to the machine frees the manufacturer from any responsibility for
damage or detriment to health which may arise as a result.
•
Before undertaking any work on the machine, switch off the tractor engine and wait
until all rotating parts of the machine come to a stop.
•
Regularly check the technical condition of the safety devices and correct tightening
of bolt connections.
•
Regularly perform service inspections of machine as recommended by the
Manufacturer.
•
Do NOT perform service or repair work under raised and unsupported machine.
•
Before beginning repair works on hydraulic systems, reduce oil pressure.
•
Servicing and repair work should be carried out in line with the general principles of
workplace health and safety. In the event of injury, the wound must be immediately
cleaned and disinfected. In the event of more serious injuries, seek a doctor's
advice.
•
Repair, maintenance and cleaning work should be carried out with the tractor's
engine switched off and the ignition key removed. Immobilise the tractor with the
Содержание PWP900
