PRONAR GP200, Руководство оператора

Страница: 26 / 66

PRONAR GP200 SECTION 2
2.6
•
Before beginning repair works on hydraulic systems, reduce oil pressure.
•
Servicing and repair work should be carried out in line with the general principles of
workplace health and safety. In the event of injury, the wound must be immediately
cleaned and disinfected. In the event of more serious injuries, seek a doctor's
advice.
•
Repair, maintenance and cleaning work should be carried out with the
tractor/carrying vehicle engine turned off and the ignition key removed. Immobilise
the tractor/carrying vehicle with parking brake. Ensure that unauthorised persons
do not have access to the vehicle cab.
•
Should it be necessary to change individual parts, use only original parts. Non-
adherence to these requirements may put the user and other people's health and
life at risk, and also damage the machine and invalidate the warranty.
•
Regularly check technical condition and mounting of all guards and protective
elements.
•
In the event of work requiring the branch cutting saw to be raised, use properly
certified hydraulic or mechanical lift jacks for this purpose. After lifting the machine,
stable and durable supports must also be used. Do NOT carry out work under the
machine, which has only been raised with the multifunction arm.
•
The machine must not be supported using fragile elements (bricks or concrete
blocks).
•
After completing work associated with lubrication, remove excess oil or grease.
•
Damaged or excessively worn circular saw blades must be replaced with new ones
recommended by the branch cutting saw manufacturer.
•
In order to reduce the danger of fire the machine must be kept in a clean condition.
2.1.6 OPERATION OF THE BRANCH CUTTING SAW
•
Before lowering or rising the branch cutting saw mounted on the multifunction arm,
make sure there are no bystanders near the machine.
•
Remove the transport cover before starting the branch cutting saw drive.
•
Before starting the branch cutting saw drive, the cutting unit must be set in working
position.