PRONAR GP200, Руководство оператора

Страница: 40 / 66

PRONAR GP200 SECTION 4
4.4
4.2 TECHNICAL INSPECTION
When preparing the branch cutting saw for normal use, check individual components
according to guidelines presented in table (4.1)
TABLE 4.1 TECHNICAL INSPECTION SCHEDULE
DESCRIPTION MAINTENANCE ACTIVITIES FREQUENCY
Condition of safety guards
Check the technical condition of safety
guards, if complete and correctly
mounted.
Check if hydraulic conduits and
linkage are correctly installed
Check if correctly installed
Technical condition of the
hydraulic system. Check according to section "DRIVE
SYSTEM MAINTENANCE" D
a
ily
b
e
fo
re
b
e
g
in
n
in
g
w
o
rk
Check if all main nut and bolt
connections are properly
tightened
Tightening torque values should be
according to table (5.2)
Every 2 hours
Lubrication points
Lubricate in accordance with the
"LUBRICATION” section Every 10
hours
Technical condition of drive
system Check the mounting of the hydraulic
motor and circular saw blades.
Every 2 hours
Technical condition of circular
saw blades Visually inspect and, if necessary,
sharpen.
Every 8 hours
Condition of drive belts Check according to Section 5.3.1 Every 8 hours
ATTENTION
Do NOT use out of order branch cutting saw.