PRONAR GP200, Руководство оператора

Страница: 16 / 66

PRONAR GP200 SECTION 1
1.6
TIP
Demand that the seller carefully and precisely fills out the WARRANTY BOOK and
guarantee repair coupons. A missing date of purchase or sale point stamp may make the
user ineligible for any warranty repair or refund.
The user is obliged to report immediately on noticing any wear in the paint coating or traces
of corrosion, and to have the faults rectified whether they are covered by the guarantee or
not. For detailed Terms & Conditions of Warranty, please refer to the WARRANTY BOOK
attached to each newly purchased machine.
Modification of the branch cutting saw without the written consent of the Manufacturer is
prohibited. In particular, do NOT weld, drill holes in, cut or heat the main structural elements
of the machine, which have a direct impact on the machine operation safety.
1.5 TRANSPORT
The branch cutting saw is ready for sale completely assembled and does not require packing.
Packing is only required for the machine's technical documentation and any extra fittings.
ATTENTION
Before transporting independently, the multifunction arm operator must carefully read
this Operator's Manual and observe its recommendations. When being transported on a
motor vehicle the branch cutting saw must be mounted on the vehicle's platform in
accordance with the transport safety requirements. The driver of the vehicle should take
particular care while driving. This is due to the vehicle's centre of gravity shifting
upwards when loaded with the machine.
Delivery is either by transport on a vehicle or independently. Transport of the branch cutting
saw connected to the multifunction arm is allowed provided that the tractor or implement
carrier driver is familiar with the Operator's Manual of the branch cutting saw and the
Operator's Manual of the multifunction arm, in particular, with the information concerning
safety and principles of hitching and transport of the branch cutting saw on public roads. Do
NOT drive the tractor or implement carrier with the multifunction arm and the branch cutting
saw connected when visibility is limited.
When loading and unloading the branch cutting saw, comply with the general principles of
workplace health and safety for reloading work. Persons operating reloading equipment must
have the qualifications required to operate these machines.