PRONAR GP200, Руководство оператора

Страница: 53 / 66

SECTION 5 PRONAR GP200
5.5
FIGURE 5.2 Replacement of circular saw blades
(1)- circular saw blade; (2)- wrench I; (3)- protective cover; (4)- screws fixing the cover; (5)-
set screws; (6)- wrench II; (7)- clamp nut; (8)- clamp;
When replacing the circular saw blade (1) (FIGURE 5.2), pay attention to condition of clamp
nut (7) that fixes the circular saw blade to the shaft. Damaged nut fixing the circular saw
blade should be replaced with a new one of the same type.
ATTENTION
Damaged or bent circular saw blade may vibrate excessively and cause damage to the
branch cutting saw and pose a risk for the operator.