PRONAR GP200, Руководство оператора

Страница: 61 / 66

SECTION 5 PRONAR GP200
5.13
5.4 STORAGE
After completed work, the branch cutting saw should be thoroughly cleaned and washed with
a water jet. While cleaning, do not direct a strong water or steam jet at information and
warning decals or hydraulic conduits. Nozzle of pressure or steam washer should be kept at
a distance of not less than 30 cm from cleaned surface.
After cleaning, inspect the whole machine, inspect technical condition of individual elements.
Used or damaged elements should be repaired or replaced.
In the event of damage to the paint coat, clean rust and dust from damaged area, degrease
and then paint with undercoat and after it is dry paint with surface coat paint retaining colour
uniformity and even thickness of protective coating. Until the time of touch-up painting, the
damaged place may be covered with a thin layer of grease or anticorrosion preparation. The
branch cutting saw should be kept in a closed or roofed building.
If the branch cutting saw shall not be used for a long period of time, protect it against adverse
weather conditions.