PRONAR GP200, Руководство оператора

Страница: 27 / 66

SECTION 2 PRONAR GP200
2.7
•
Before starting the branch cutting saw, make sure that there are no bystanders
(especially children) or animals in the danger zone. The machine operator is
obliged to ensure proper visibility of the machine and the working area.
•
Start working with the branch cutting saw only when the nominal speed (1000 rpm)
of the multifunction arm PTO or nominal hydraulic power is reached. Do NOT
overload the branch cutting saw.
•
When cutting branches, do NOT use a PTO speed higher than 1000 rpm and the
oil pressures and flow rates exceeding the recommended ones.
•
Cutting the branches at a high altitude could be hazardous for the operator. The
operator's cab should be equipped with a Falling-Object Protective Structure
(FOPS) according to ISO 8083.
•
When trimming the branches on the edge of the road, there is a risk that falling
branches and debris can pose a hazard to bystanders and other road users.
•
Do NOT leave the tractor/carrying vehicle cab, when the machine drive is engaged.
•
Do NOT stand within the branch cutting saw's working zone.
•
Do NOT approach the guards of the circular saw blades until the rotating parts
come to a complete stop.
•
Do NOT operate the branch cutting saw while reversing. Raise the machine while
reversing.
•
Keep a safe distance from overhead electric power lines during travel with the
raised branch cutting saw.