PRONAR GP200, Руководство оператора

Страница: 39 / 66

SECTION 4 PRONAR GP200
4.3
•
that there is no knocking or noise in the hydraulic motor arising from scraping or
grinding of metal elements,
•
that the circular saw blades do not vibrate excessively.
The branch cutting saw's operation at no load should be smooth. Shaking of hydraulic motor
and circular saw blades is not acceptable, nor is abnormal noise and vibrations coming from
loose nut and bolt connections. Check fastening of circular saw blades after they have come
to a complete stop. Confirm that oil does not leak from the hydraulic motor.
DANGER
Before using the branch cutting saw, the user must carefully read this Operator's
Manual.
Careless and incorrect use and operation of the branch cutting saw, and non-compliance
with the recommendations given in this Operator's Manual is dangerous to your health.
The branch cutting saw must never be used by persons who are not authorised to drive
agricultural tractors/carrying vehicles, including children and people under the influence
of alcohol or other drugs.
Non-compliance with the safety rules of this Operator’s Manual can be dangerous to the
health and life of the operator and others.
Before starting the branch cutting saw, make sure that there are no bystanders in the
danger zone.
If any faults are detected they must be identified and rectified. If a fault cannot be rectified or
the repair could void the warranty, please contact retailer for additional clarifications.