Promega Maxwell RSC Instrument Скачать руководство пользователя страница 7

Страница: 7 / 73

Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516

www.promega.com

TM411 · Revised 4/15

1.H. Precautions

Important Safety Instructions. Save these instructions.

• Changes or modifications to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

• This equipment has been designed and tested to CISPR 11 Class A. It may cause radio interference, in

which case you may need to take measures to mitigate the interference.

• Do not use this device in proximity to sources of strong electromagnetic radiation (e.g., unshielded

intentional RF sources), as these may interfere with the proper operation.

• Do not use this instrument for anything other than its designed purpose.

• Always disconnect the power to the instrument and the Tablet PC before cleaning or performing routine

maintenance.

• Do not disassemble unit.

• Ensure cartridges, elution tubes and plungers have been securely inserted in their correct positions and

orientation. Failure to do so may result in damage to the instrument.

• Use only Promega Maxwell

RSC branded and supplied cartridges, plungers and elution tubes.

• Do not reuse cartridges, plungers or elution tubes.

• If the equipment is used in a manner other than that specified by Promega, the protection provided by

the equipment may be impaired.

• Keep hands clear of instrument platform as it moves in and out of the instrument.

• During elution, the heated elution block at the front of the platform becomes very hot. Do not touch.

• To avoid muscle strain or back injury, use lifting aids and proper lifting techniques when removing or

replacing the instrument.

• Equipment can be hazardous due to the use of chemical and biohazardous substances.

• Instrument door should be opened and closed only by using the Maxwell

RSC software. Do not

manually pry the door open or override the door sensor during protocol operation, as it will result in the
protocol being aborted.

• This instrument can be used with potentially biohazardous materials. Use appropriate personal

protective equipment (gloves, safety goggles, lab coat, etc.) for handling and disposing of biohazardous
materials.

• Do not load any additional software programs on the Tablet PC supplied with Maxwell

RSC

Instrument. Additional programs may cause the application to slow down.

Содержание Maxwell RSC Instrument










































































Результаты поиска

Содержание Maxwell RSC Instrument

Отзывы:

Похожие инструкции для Maxwell RSC Instrument

Бренды по названию

Популярные бренды

Promega Maxwell RSC Instrument, Руководство по эксплуатации

Результаты поиска

Содержание Maxwell RSC Instrument

Отзывы:

Похожие инструкции для Maxwell RSC Instrument

Бренды по названию

Популярные бренды