52
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM411 · Revised 4/15
www.promega.com
5.D. Quantitating with the Quantus™ Fluorometer (continued)
6. Place the sample to be quantitated (consult the Quantus™ Fluorometer and Fluorescent Dye Protocol
for instructions on adding sample to dye) into the Quantus™ Fluorometer and close the lid.
7. After quantitation is complete, a result will be displayed to the right of the sample identifier on the
Maxwell
®
RSC screen.
Figure 54. Quantus™ Measurement Screen.
After making a quantitation measurement with the
Quantus™ Fluorometer, the quantitation value is displayed to the right of the sample identifier.
8. Press down on the lower right corner of the Quantus™ Fluorometer lid to open the Quantus™ and
remove the quantitated sample.
9. Discard the sample per your institutional disposal regulations.
10. To move to the next sample, either press the arrow buttons on the lower right or left of the Quantus™
Fluorometer Measurement screen or tap the sample number.
12211T
A
