Promeba PB-460 Series, Руководство пользователя

Страница: 8 / 32

8
USER GUIDE // STRETCHER SUPPORT SERIES PB460 AND PB455
Review 2022/02
01.10 Specific warnings
1. Establish a maintenance program and periodic testing, identifying a reference employee. The person to
whom the ordinary maintenance of the device is entrusted must ensure the basic requirements foreseen by
the manufacturer in the user’s manual.
2. Always wear gloves during maintenance procedures.
3. Use only accessories/spare parts that are original or approved by Promeba, S.L. when carrying out any
operation, to avoid causing any alteration or modification to the device, otherwise we assume no responsi-
bility for the proper functioning or damage resulting from device to the patient or the operator and warran-
ty will be considered void.
4. Always respect the maximum capacity of the device, as indicated in this user’s manual. Maximum load
capacity means the total weight distributed according to the human anatomy. In determining the load of
the total weight on the product, the operator must consider the weight of the patient, the equipment and
the accessories. Moreover, the operator must consider that the overall dimensions of the patient do not
reduce the functionality of the device.
5. The stretcher support must be installed in accordance with the specifications provided by the manufac-
turer and ensuring its compatibility with technical specifications of the stretcher.
6. Check that the configuration and the installation of the stretcher support are suitable for the stretcher
that is being used to ensure the proper use of the stretcher.
7. Promeba S.L. will not be responsible if an unauthorized stretcher anchor is used. This must comply with
the requirements of the EN 1789 standard, making it able to withstand accelerations of 10 g in all directions.
8. Do not use bleach to disinfect the product, neither use water jets nor pressurized air. Use a hydro alcoho-
lic based disinfectant and wash with water.
9. The device and all its components, after washing, should be allowed to dry completely before storing. Do
not use drying machines.
10. Do not lubricate any part other than the one described in this manual. Lubrication must be carried out
after cleaning and complete drying.
01
INTRODUCTION
28. As a distributor or end users of products manufactured and/or marketed by Promeba, S.L., you are strict-
ly required to have a basic knowledge of any legal requirements existing in the goods final destination
country applying to the devices contained in this supply (including laws and norms regarding technical
specifications and/or safety requirements) and therefore you are also strictly required to have the necessary
knowledge to guarantee all aspects regarding the total conformity of the products to the regulations in the
relevant territory.
29. Act with all due care and diligence, and contribute to ensure conformity to general safety requirements
of all devices marketed in the territory, by providing final users with all necessary information for carrying
out periodical checks on their devices, as specified in the relevant user manual.
30. Actively contribute to product safety checks on products sold, by communicating any relevant risk
analysis information both to the manufacturer and to any competent authorities so that the necessary ac-
tions can be promptly taken.
31. Be aware that in the event of any failure to conform to the above mentioned requirements you will be
deemed fully responsible for all damages that might occur. Therefore we expressly disclaim any responsibi-
lity and/or liability for your non-compliance with the present “Regulatory provisions”.