background image

10

USER GUIDE //

 STRETCHER SUPPORT SERIES PB460 AND PB455

Review 2022/02

01.11  Residual risks

The residual risks listed below have been identified only with reference to the intended use of the device:

1. Use by untrained personnel may result in injury to patient, operator, or third parties.

2. Inappropriate disinfection procedures can create a risk of cross infection.

3. Installation carried out by untrained personnel, could result in inadequate fastening of the device inside 

the vehicle, with consequent risks related to its instability or mobility.

4. Failure to comply with the warnings for operators can create risks.

5. Failure to read and understand the product instructions can result in injury to the patient and operators.

6. Do not place body parts under the stretcher support; this may cause crushing risks when the stretcher 

support is moved. Never put your feet or hands under the device.

7. Crushing injuries could arise from sideways or extraction movements of the stretcher support. Always 

ensure that nothing interferes with the stretcher support before moving it.

8. Loading of the stretcher on the stretcher support, especially if the device is in tilted position, could need 

great effort from the operator, resulting in injuries. Pay attention during loading and unloading of the stret-

cher and, in case of heavy weight, consider that at least 2 operators are required.

9. The operation of any movement of the device when the vehicle is running, could result in extremely vio-

lent movements in case the vehicle has an impact. It is recommended to make the adjustments only when 

the vehicle is not moving.

10. The electro-valves temperature can reach high values (about 70°C). In case of maintenance, use appro-

priate Individual Protection Devices such as gloves. It is however suggested to wait for the cooling of such 

components.

11. The connection to a power source with improper voltage, or other than described in this manual, can 

make the device not usable or cause serious injuries.

12. The device is not for continuous operation. Repeated operation of controls, not consistent with normal 

usage practices, may damage the device and may impair its normal operation causing the impossibility to 

use the device when needed. Always respect the duty cycle described in following paragraphs.

30. Do not change the load after the suspension function has been activated (if the device is provided with 

this function)

31. Always disconnect the electric stretcher support from the power supply during maintenance and clea-

ning.

32. The layout of the cables inside the structure should never be changed.

01 

INTRODUCTION

Содержание PB-460 Series

































Отзывы: