background image

USER GUIDE //

 STRETCHER SUPPORT SERIES PB460 AND PB455

Review 2022/02

31

09 

PRODUCT WARRANTY

Promeba, S.L. guarantees that its products have satis-

factorily passed all established quality controls, both 

functional and material. The duration of the guarantee 

is 2 years from the date of purchase of the product.

This guarantee will be valid only when it is presented 

with the original invoice or proof of purchase (indica-

ting the date of purchase, model and the name of the 

distributor) together with the defective product during 

the period covered by the guarantee. Promeba, S.L. re-

serves the right not to offer the free warranty service 

if the indicated documents are not presented or if the 

information they contain is incomplete or illegible.

1. This warranty will not apply if the model name or 

serial number of the product has been altered, erased, 

disappeared or becomes illegible.

2. This guarantee does not cover transportation costs 

or risks derived from the transportation of your pro-

duct to and from Promeba, S.L.

3. This warranty does not cover any of the following: 

a) Periodic maintenance and repair or replacement of 

parts derived from normal wear and tear.

b) Expendable material (components that are expected 

to need periodic replacement during the life of the pro-

duct, such as non-rechargeable batteries, light bulbs, 

etc.).

c) Damages or defects derived from the improper use, 

operation or treatment of the product and not due to 

normal use of the product.

d) Damages derived from:

i. Misuse, including:

- Treatment that results in damages or physical, superfi-

cial or appearance changes of the product.

- Installation, use or storage of the product in a way 

that does not respect the instructions described by 

Promeba, S.L.

- Maintenance of the product in a way that does not 

respect the instructions of Promeba, S.L. for proper 

maintenance.

- Installation or use of the product in a way that does 

not respect the technical or safety regulations of the 

country where it is used or installed.

iii. Use of components not provided with the product 

or incorrect installation of accessory parts not pre-

viously tested.

iii. States or defects of the system in which the product 

is used or incorporated with the exception of other pro-

ducts Promeba, S.L. designed for use with the product.

iv. Use of the product with accessories, peripheral units 

and other products of a type, condition or standards 

not established by Promeba, S.L.

v. The manufacturer or distributor will be solely respon-

sible for deciding whether to send the parts for repair, 

or to replace the product in its entirety. In no case will 

operators be sent to repair or replacement of the pro-

duct.

Except in the cases mentioned above, Promeba, S.L. 

will make no warranties in relation to product, perfor-

mance, accuracy, reliability, or fitness for logic purpose 

of the equipment or other type. If this exception is not 

legal or contemplated by current law, Promeba, S.L. will 

limit or exclude your warranties only to the extent per-

mitted by applicable law.

The only obligation on the part of Promeba, S.L. in con-

nection with this warranty is to repair or replace parts 

subject to the terms and conditions of this warranty.

Promeba, S.L. is not responsible for loss or damage to 

products, this warranty or others, including economic 

loss or non-assessable damage; the price paid for the 

product; loss of profits, income, information, usufruct 

or use of the product or associated products or indi-

rect, accidental or critical loss or damage.

This clause refers to whether the loss or damage is due 

to deterioration or inoperability of the associated pro-

duct due to defects or unavailability of Promeba, S.L., 

which has caused downtime, loss of user time or busi-

ness interruption.

In cases where the law prohibits or limits these liability 

exclusions, Promeba, S.L. will exclude or limit his lia-

bility only to the extent permitted by applicable law. 

For example, there are countries that prohibit the ex-

clusion or limitation of damages caused by negligen-

ce, reckless negligence, willful misconduct, fraud and 

similar actions. The responsibility of Promeba, S.L. In 

this guarantee will not exceed, in any case, the price 

paid for the product, but if the current law allows only 

limitations of greater responsibilities, these will apply.

Содержание PB-460 Series

































Отзывы: