Promeba PB-460 Series, Руководство пользователя

Страница: 26 / 32

26
USER GUIDE // STRETCHER SUPPORT SERIES PB460 AND PB455
Review 2022/02
MOBILE ELEMENTS
Due to the intense and continuous use of mobile elements such as levers or commands, periodically exa-
mine its proper operating.
Inspect the mechanical connections that may exist.
LUBRICATE
Generally, all moving parts must be lubricated. Our products leave the factory completely lubricated. Howe-
ver, it is possible that the elements lose lubrication with the passage of time and the use of the product,
either due to loss of lubricant or dirt.
Periodically clean and lubricate affected areas according to manufacturer’s specifications.
Check for loose, missing or worn parts. Periodically inspect all moving parts to ensure components are tight.
WEAR AREAS
Inspecting regularly on the system components for signs of wear is a preventive measure that can reduce
breakdowns. Check possible lubricant leakages, grooves or bearing in poor condition.
MECHANICAL FIXING
We call mechanical fixing elements to the components used to fix the product as a whole, mainly screws
and derivatives.
To some terms of use, due to vibrations or impacts, certain elements may lose their tightening torque or
fixing properties. Periodically review that there are no loose elements, especially on moving parts. Please
note and always respect the recommended tightening torques.
REPLACEMENT OF COMPONENTS
In the event that certain mechanical parts need to be replaced by qualified service personnel, they should
contact our sales department for more information on ordering spare parts and their installation.
04
GENERAL MAINTENANCE
FIGURA 5
CLEANING
It is essential to keep the equipment clean to ensure a proper use and durability of the set. A thorough clean
must be done periodically, especially in areas exposed to dirt that may be damaged such as gears or mobile
elements.
Do not use high-pressure cleaning systems, neither bleach to disinfect the product, they can damage it.
Instead, use a hydroalcoholic based disinfectant, wash with water and let it dry naturally, do not use sources
of direct heat to dry.
MAKE SURE TO KEEP AREAS FROM FIGURE 5 FREE OF WATER AND HUMIDITY. TAKE SPECIAL CARE NOT TO
GET THEM WET WHILE WASHING THE SET.
MAINTENANCE SUMMARY
EVERY USE WHEN NEEDED EVERY MONTH EVERY YEAR EVERY 4 YEARS
DISINFECT
X
CLEAN
X
INSPECT
X X
LUBRICATE
X X
SPRINGS REPLACEMENT
X
SERIE PB460 SERIE PB455