July 2018
4-59
4
REMOTE CONTROL
This chapter describes basic configuration of IEEE488.2 based remote control.
4.1
Interface Configuration
4.1.1
Configure Remote Interface
USB configuration:
PC side connector:
Type A, host.
Equipment side
connector:
Rear panel Type B, slave.
Speed:
1.1/2.0 (full speed).
RS 232 configuration:
PC side connector:
RS232 male port.
Equipment side
connector:
RS232 female port.
Baud Rate:
9600, 19200, 38400, 57600, 115200.
Parity:
None, Even, Odd, Space, Mark, Multidrop.
Stop bit:
1, 1.5, 2.
Data bit:
5, 6, 7, 8.
The
AE-366B
can use either the type B USB port or the RS232 on the rear panel
for remote control.
When using the USB B port, the
AE-366B
uses a USB driver to simulate an
RS232 connection with a PC via USB. It is these RS232 settings that are
configured for remote control.
Before using the USB B port for remote control, please install the USB driver.
Содержание AE-366B
Страница 1: ...AE 366B SPECTRUM ANALYSER 0 MI2007...
Страница 8: ......
Страница 57: ...July 2018 3 49 Figure 48 Average Off Figure 49 Average On 8x...