Promax AE-366B Скачать руководство пользователя страница 64

Страница: 64 / 86

NOTE

The file name will be automatically created in the following format:File
name: SCRXX.bmpWhere XX is a number that is incremented each
time the file is saved.

WARNING

Do not remove the USB drive until the file has completed saving.

3.11.5

Hardcopy Setup

The Hardcopy Setup key is used set the image file properties of the bitmap file
that is created when the Hardcopy key is pressed.

Ink Normal

This is the normal, default image setting.

Ink Saving

This will invert all the colors on the display so that the file will conserve ink
when printed.

Press

and choose the image type:

Ink Normal

Ink Saving

NOTE

The next time the Hardcopy key is pressed, the image will be saved

using the settings above.

3.11.6

Load Default Settings

The Preset key is used to load the default settings.

Press

The system will load the preset settings and the screen will

update with the new settings.

NOTE

The default settings cannot be changed.

3-56

July 2018

Содержание AE-366B























































































Результаты поиска

Содержание AE-366B

Отзывы:

Похожие инструкции для AE-366B

Бренды по названию

Популярные бренды

Promax AE-366B, Руководство пользователя

Результаты поиска

Содержание AE-366B

Отзывы:

Похожие инструкции для AE-366B

Бренды по названию

Популярные бренды