
5
ź
Maintenance, cleaning and repair of tie down straps
:
by the sharp edges of the load on which it is used.
Oil the mechanism of the tensioning device on a regular basis.
ź
A visual inspection before and after each use is recommended.
Thoroughly wash webbing in cold water only and dry naturally.
ź
Only legibly marked and labelled tie down straps shall be used.
Tie down straps may be repaired by manufacturer's service only.
ź
Web lashings shall not be overloaded: Only the maximum
Manufacturer:
hand force of 500 N (50 daN on the label; 1 daN = 1 kg) shall be
P.P.H GIT S.C.
applied. Mechanical aids such as levers, bars etc. are not to be
used as extensions unless they are part of the tensioning
ul. Hardego 10,
device.
Krzywopłoty
ź
Web lashings shall never be used when knotted.
32-310 Klucze
ź
Damage to labels shall be prevented by keeping them away
Distributor:
from sharp edges of the load and, if possible, from the load.
PROFIX Sp. z o.o.
ź
The webbing shall be protected against friction, abrasion and
ul. Marywilska 34,
damage from loads with sharp edges by using protective
sleeves and/or corner protectors.
03-228 Warszawa
Care should be taken that the tie down strap is not damaged
The policy of the PROFIX company consists in permanent improvements of the offered products and
therefore the company reserves the right to make amendments to the product specification without a
prior notice. The images included into the operation manual are only of the exemplary nature and may
slightly differ from actual appearance of the device purchased.
This
instruction
manual
is
protected by copyright.
Copying it
without the written consent of PROFIX Co.
Ltd. is prohibited.
Содержание 46750
