561383-002 Issue 1.1
13
3.1
Power On
EA Heightmaster
+
will only operate when it is switched on.
To activate the EA Heightmaster
+
turn the key switch to any position other than OFF. The
System title and software version will be momentarily displayed before proceeding to the
selected mode. See section 3.3.
3.2 Initialisation
Once activated, EA Heightmaster
+
will perform an initialisation procedure. This will take three to four seconds, during which time all sensors
and auxiliary components are checked for correct operation. If all checks are successfully completed, operation will commence. The next
screen displayed is dependant on the position of the key switch. If problems are detected during initialisation, relevant warning message(s) will
be issued.
See section 10 for further information on error conditions.
RCI
With the key switch in the RCI position, RCI mode
and duty selection can be accessed. See section
3.4 for further details.
LW5 MK2: EA+
VER : X.XX
3.0 System Operation
Variable Existing Setting
With the key switch in the Variable Existing
Setting position, the variable height monitoring will
be activated. See section 6.0 for further details.
3.7m and 4.6m Fixed
Height
With the key switch in the 3.7m or 4.6m position, the
predefined height limits are selected. See section 4.0 for
further details.
Variable Adjust
With the key switch in the Variable Adjust position, three
functions can be accessed; variable height limit setting ,
selecting minimum radius limits and No Protection
Transport Mode. See section 3.5 for further details.
See section for more information.
3.3 key Switch Positions
