561383-002 Issue 1.1
12
Cab mounted combined Computer/LCD display unit with lamp bar. Rear mounting
plate carries sockets for connection to DC power, lamp bar and the CAN system.
AS7 boom angle/ pressure sensor (or primary boom sensor on hydraulically
adjustable booms). This sensor is usually mounted on the OFFSIDE of the boom. The
sensor is connected to the Combi Box and to either the arm sensor on monoboom
machines, or the secondary boom sensor on hydraulically adjustable booms.
[OPTIONAL] Secondary boom angle sensor (AS7 Artic sensor) for hydraulically
adjustable booms. This sensor is usually mounted on the OFFSIDE of the secondary
boom. The sensor is connected to the primary boom sensor and arm sensor.
AS7 Arm/ Bucket [OPTIONAL] angle sensor usually mounted on the NEARSIDE of
the arm near the pivot pin. The sensor is connected to the boom sensor. The bucket
sensor is fitted to any extra arms that are supplied with the machine. This sensor has
a special „Terminator‟ plug fitted. This is required for correct system operation.
4 way Combi Box provides the interface to solenoid valves which control the motion of
the machine equipment.
[OPTIONAL] Reeling drum only fitted to telescopic booms. This can be mounted on
the side or top at the base of the boom. The reel will extend and retract with the
boom.
2.0 System Components - Continued
[OPTIONAL] 4-way Interface box. This is fitted to machines with telescopic section. It
will be located in an appropriate location in the CAN line near to the reeling drum.
