561383-002 Issue 1.1
20
D.
The basement/trench can now be extended at will. To extend,
move the machine to the new position, place the bucket at the base
of the initial excavation, and press the ENTER button to re-reference
the position. The excavation can now be continued without the need
to watch the display. When the correct depth is achieved (or
exceeded) the „TOO LOW‟ internal alarm will sound. As the system
has been referenced to the bottom of the initial excavation (and not
to the track base of the machine) the position/height of the actual
excavator is not important.
5.3 Dig Depth Monitoring Mode - Continued
