21
can work at the same time is set in the installer con-
figuration).
*Program not enter*
P14
This screen informs that the fertilizers for program
n.12 can not be entered as it is already being used for
other program (however, the irrigation sector has been
entered).
*Fertili. not enter*
P12
This screen informs that at 05:33 on Tuesday, there
was an electromagnetic or electrostatic interference, re-
starting automatically.
*Interference*
Tu.05:33
Once all the anomalies have been shown, the
screens with the state of the controller will be displayed.
7.4.2. Malfunctions
If any of the following malfunctions happens, the
controller will automatically flash the message intermit-
tently on the screen until the “ENTER” key is pressed
(maintain the key pressed down for at least one sec-
ond). Until the malfunction is cancelled, the unit does
not allow any activation of the irrigation programs.
If the general malfunction input was activated, all
the outlets will be deactivated and the screen will show
this message with the day and time when it occurred.
*General malfunction*
Sat.19:01
If this message appears, the internal battery has
completely run down with the loss of the time and the
data of the current operation plus the totals, but not the
irrigation programs.
WARNING!
Set clock
The battery can keep this data for a minimum of 3
days, without external power. The parameters and the
programs are never erased from the memory due to a
cut of the electricity supply.
The following screen warns that there has been a
stop of the unit by MANUAL CONTROL, waiting to be
reactivated.
The outlets are deactivated but the program runs
its course.
WARNING!
Manual system stop
On connecting the unit to the mains, this screen
might appear for a few seconds, while the timetable of
the irrigation programs is brought up to date.
Set timetable
10:33
Содержание Agronic 2000 Series
Страница 24: ...24 NOTES R 1189 3...