16
7. USE
This is the chapter the user should mainly know
as it contains the instructions which will be used more
frequently.
Press the FUN key (Functions) to do anything
with the controller, except “consult”.
The following screen with the first two options will
appear:
FUN:”1” = PROGRAMS
FUN:”2” = MANUAL
The PROGRAMS function is used to enter, erase
or read the automatic working orders.
The MANUAL function is used to activate and
deactivate at the moment, manually.
On pressing the FUN key again, the following
screen appears with the other two options:
FUN:”3” = PARAMETERS
FUN:”4” = TOTALS
The PARAMETERS function is used to adapt the
unit to the particular necessities of every installation.
The TOTALS function is used to consult the total
working units in general and sector by sector.
7.1. PROGRAMS
The PROGRAMS function is used to enter, erase
or read the automatic working orders.
The memory of the controller has a capacity for
31 independent or sequential programs.
An “independent program” is a complete work-
ing order which includes:
The number or reference of the program; the irri-
gation sector to be activated; the day or days of the
week when it should be repeated; the starting time;
the duration of the irrigation and the duration of each
of the fertilizers (if there are any).
Choosing option n.1 of the FUNCTIONS menu,
the screen will ask for the program number.
P00
Introducing the desired number, all the informa-
tion of this program will be displayed. With the key
marked with an upwards arrow, the different programs
will be displayed.
When the program has been chosen, and the
ENTER key pressed, we are now inside and the
screen will
ask
for
the
remaining
details,
placing
the
cursor
(
_
) on every one of the values.
After introducing the first figure of an existing
value, it will show a zero plus the new figure.
Complete screen of programs:
Program number
Irrigation sector number
Days of the week
P07 03 S .T.T F . 10:30
Starting time
I04:30 F
1
1:30 F
2
0:52
Time fertilizer 2
Time fertilizer 1
Irrigation time
The volume is explained in section 8 of this man-
ual.
The unit will only accept sector numbers which
have not been configured as general outlets in “PA-
RAMETERS”. There is the possibility of working with
four sector groupings that are identified by the codes
71 to 74. To do this, the risk sector will be substituted
by the number of the group. In “Parameters – Various”
the sectors are assigned to the group.
If two zeros (00) are introduced followed by EN-
TER, this program will be erased after confirmation (as
explained in the Erase section 7.1.4.).
Every day of the week (starting at Sunday) is in-
dicated with a spot (inactive day) or with the initial of
the corresponding day (active day). They become
active or inactive pressing the key of the correspond-
ing day and ENTER.
One, various or every day of the week can be
chosen. Press the Daily key to activate or deactivate
all the days.
The starting time is on the 24 hour system (00:01
to 23:59 hours). The 00:00 value is not valid as irriga-
tion starting time. A program can be started by an
order of the PS input (program start), setting the start-
ing time at the 88:00 value.
The irrigation time can go from 1 minute to 99
hours and 59 minutes, and the time of every fertilizer
can go from 1 minute to 9 hours and 59 minutes.
Содержание Agronic 2000 Series
Страница 24: ...24 NOTES R 1189 3...
