REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual TEKNA ADVANCE 35
SERVICE MANUAL
ONE PIECE PLASTIC FOOTPLATE
WITH AUTOMATIC CLOSURE
ANGLE ADJUSTMENT
With round tube
: loosen the bolt
A
of both adjustment supports.
With elliptical tube
: loosen the grab screw
A1
and the bolt
A
of both adjustment supports.
Turn the plate frontward or backward.
Once reached the correct inclination, tighten the bolt
A
on one of the two sides.
Check that the moving side of the plate evenly leans on the lower support.
To do so, with a finger in the middle of its extremity, gently press the plate down and check how it leans over the support.
If it is even, the adjustment is correct.
Should it lean on one side first, the footplate will work under more stress, therefore it will be necessary to correct the adjustment on the side
that is still not tightened. Finally, tighten the bolt
A
of this side, too
.
With elliptical tube
: tighten the grab screw
A1
of both supports.
INTERNAL 2/3 INTERNAL 2/3 EXTERNAL EXTERNAL
10 cm
WRONG
CORRECT
POSITIONING
4 positions: internal; 2/3 internal; 2/3 externa (not present in the order form); external
Follows next page
A
A
A1
A
con tubo ellittico
