REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual TEKNA ADVANCE 25
SERVICE MANUAL
BRAKE WITH SUPPORT PLATE
The adjustment of the sport brake is the same except for:
The distance
D
, in fact, in its resting position, the brake is far from away from the tyre. Just
make a few tries.
The brake support
O
has only one fixing position, but it can slide along the slot of the plate
A
.
When you loosen the bolts
B,
you have to hold the nuts
E
with a spanner.
You can adjust the brake position by sliding its rod through the support
O
after loosening
the grab screw
P
.
In some case, for the versio with swing-away, removable footplates, there may be interfer-
ence between brake and front frame. That will impede the correct adjustment of the brake.
There are two solution to that problem.
1) Move the rear wheel backward (more prudential setting)
2) Space the plate of support from the frame (max. 5 mm), remove the bolt
T
and its corre-
sponding nut, cut off 5 mm the point of the bolt, slightly squeeze the thread with a pincers,
spread some strong thread lock glue and screw the bolt hard. No need of the nut.
P
SPORT BRAKE
M
