REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual TEKNA ADVANCE 43
SERVICE MANUAL
SEAT WIDTH ENLARGEMENT
It is possible to make the seat width larger by maximum 10 mm each side, by modifying the side guard fixing.
Insert longer bolt and washer
A
on the side guard and add one or two 5 mm spacers
E
.
Screw the bolt in the adjustment ring
G
without tightening because you will later need to slide it up or down.
Insert the longer bolts
B
through the slot of the plate, add one or two 5 mm spacers
E
on each bolt and also the half-moon spacer
D
.
Align the slot with the fixing holes on the frame and let the bolts through them.
Put washer and nuts and screw them without tightening because you will later need a little adjustment.
During this step, the rear fixing of the side guard is free to slide.
Remove bolt/washer
A.
Remove bolts/washers/nuts
B
that fix the plate
C
.
Now, the side guard is still fixed to the plate, but it is not necessary to remove it (it may turn but not slide). Even the brake is still fixed, but
you do not need to remove it.
Pay attention to the half-moon spacers
D
and, if already present, the spacers
E
between the plate
C
and the frame.
Note: one bolt
B
(not in this pictures), may use as spacer the crossbar’s seat tube support
F
.
The bolts
A
and
B
have to be replaced with 5 or 10 mm longer ones according to the wished enlargement.
Follows next page
D
E
F
B
C
A
B
E
G
E
A
E
D
E
E
D
