REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual TEKNA ADVANCE 37
SERVICE MANUAL
ONE PIECE ALUMINIUM FOOTPLATE
WITH AUTOMATIC CLOSURE (COMPACT)
ANGLE ADJUSTMENT
With round tube
: loosen the bolt
A
of both adjustment supports.
With elliptical tube
: loosen the grab screw
A1
and the bolt
A
of both adjustment supports.
Turn the plate frontward or backward.
Once reached the correct inclination, tighten the bolt
A
on one of the two sides.
Check the footplate folds and unfolds automatically when opening or closing the seat (you may need to make a minor adjustment working on
the plate) and then fix the bolt
A
of the other side
.
With elliptical tube
: tighten the grab screw
A1
of both supports.
POSITIONING
2 positions: internal; external
REVERSING THE FOOTPLATE
1) Loosen the angle adjustment bolts
A
and slide off the lock and rotation sides supports
from the tube and assemble them reversing their position.
2) Or, remove the tubes, follow instructions of chapter
footplate distance
and assemble them
reversing their side.
Finally, adjust the inclination
and tighten the bolts
A
—
see also
“angle adjustment”
.
IF THE FOOTPLATE DOES NOT FOLD AUTOMATICALLY
The angle adjustment of the two supports is different: adjust one of the two supports (see
“
angle adjustment
”).
The friction of rotation of one or both supports is excessive: loosen the bolt
B
.
The parts involved in the rotation are dirty: screw off the bolt
B
to remove the footrest plate
from the support; clean the parts, re-assemble the plate on the support and tighten the bolt
B
making sure the rotation is free, but with a minimum play.
To prevent the bolt
B
from loosening accidentally, it is advisable to squeeze a little part of its
thread with a wrench, spread a drop of strong thread lock glue, insert it and screw it.
A
A
Clean the parts
A B
B
A
A
A1
A
With elliptical tube
