REMOTE CONTROL:
Line Remote Access:
Any phone with tone dialing function can be used to call the PDX-1715 and
check Incoming Messages in a remote way.
After the PDX-1715 answers the call and OGM is playing, enter the 4 digits
security code to enter the Remote mode.
Attention: When the remote access code=0000, line remote access is disable.
User must enter other 4 digits code in order to enable the line remote access.
Remote Access Code Setting:
(Factory default code is 0000)
1. Press button to enter the menu mode during standby.
2. Press
∆/∇
button to select [SYSTEM].
3. Press OK button to confirm and the display will show [ANSWERER].
4. Press OK button and press
∆/∇
button to select [SETUP].
5. Press OK button and press
∆/∇
button to select [SECURITY].
6. Press OK button to confirm and enter 4 digits code.
7. Press OK button to confirm and exit to previous menu.
Table for operation of DTMF code:
Function
DTMF Code
Message Playback
1
Skip to next message
6
Back to previous message
4+4
Repeat current message
4
Delete current message
3
Stop all operation but not release the line
5
Stop all operation and release the line
9
REMARKS:
If there are new messages (unread), the system plays the new message only,
otherwise it will play all old messages.
22
Содержание PDX-1700 Series
Страница 1: ...USERS MANUAL PDX 1700 series...
Страница 28: ...0681...