8.2 EV BME1T Microphone station
The EV BME1T has just the TALK key and the status leds.
The assignment is done through the BEST software.
The audio content is broadcasted by pressing the TALK key.
When configuring the system through the BEST software, it is possible to define
the unit as a fire alarm call station. In this case, the system will perform the
continuous monitoring of all audio and data path, from the microphone capsule
up to the wiring to the master unit.
8.3 WG-MTU06 Microphone station
The WG-MTU06 has 6 selection keys and the TALK button.
To broadcast the audio content, first select it by hitting one of the six selection
keys, then press TALK.
The assignment of the audio content (recorded, spoken, general or alarm) is
performed through the BEST software.
Each selection key has a led close to it. This will inform the user if the content can
be broadcasted or not.
GREEN
: the selection is ready to be broadcasted.
RED:
since the system as the no free resources to process the assigned priority
level selection, this can not be broadcasted.
ORANGE:
“target change” (see below)
Led OFF:
no selection
SPECIFIC FEATURES THE WG-MTU06 CALL STATION
Juxtaposed contents
The system allows to juxtapose one or more identical contents, with the excetpion
of their destination. This will allow to broadcast the same content over zones or
groups by composing the destination.
EXAMPLE: in case of a hotel, if the key 1 is associated to a chime followed a live
spoken announcement on the “Restaurant” zone, and the key 2 is associated to a
chime followed by a live spoken announcement (same as key 1) on the “Hall”
zone, it is possible to select them both (key 1 and 2) and broadcast the
announcement (TALK key) on both zones.
EXAMPLE: if the key 1 is associated t a chime follwoed a live spoken
announcement on the “Restaurant” zone, and the key 2 to live spoken
announcement, but with no chime, on the “Hall” zone, it will not be possible to
select them both. In this case the selection of one of the two will cancel the other
if previously selected.
Destination change
It is possible to change the broadcasting destination (zone or group) of an audio
content. Please consider this example
