Prodigit 3350F Series, Руководство по эксплуатации

Страница: 100 / 133

3350F Series Operation Manual 91
[STATe ： ] PROTect ？
Syntax
：
[ STATe
：
] PROTect
？
{
；

NL}
Purpose
：
Query if there have protection flag which had been set in this 3350F
Description
：
1.PROT? means the status of Protection of 3350F. “1” means OPP
occurred.”4”means OVP. “8” means OCP. Table 4-10 shows the
corresponding number of protection status
2.Use command CLR to clear the register of PROT status to be “0”
Table 4-10 register of PROT status
[STATe
：
] CCR {AUTO

R2}
Syntax
：
[STATe
：
] CCR {AUTO

R2}{
；

NL}
Purpose
：
Set the CC MODE RANGE to be forced to switch to RANGE II
Description
：
It will switch the RANGE position automatically when setting for AUTO Set
R2 when implementing RANGE II
[STATe ： ] NGEABLE {ON

OFF}
Syntax
：
[STATe
：
] NGEABLE {ON

OFF} {
；

NL}
Purpose
：
To set the GO/NG check function enable or disable.
Description
：
To set the function of NG judgment opens when POWER ON. When
setting for POWER OFF, the function of NG judgment will not be
implemented.
[STATe
：
] POLAR {POS

NEG}
Syntax
：
[STATe
：
] POLAR {POS

NEG} {
；

NL}
Purpose
：
Set for the display of the voltage meter shows the pole is contrary or not
Description
：
Set the display of the voltage meter shows the pole. If it shows POS, that
means the pole is not contrary. If the pole is contrary , it will show NEG
[STATe ： ] START
Syntax
：
[STATe
：
]START {
；

NL}
Purpose
：
Set for Load to implement the test.
Description
：
Set for Load to implement the test , and according to TEST
CONFIG(TCONFIG) , the Load will start to test the items and
parameters which are required
[STATe
：
] STOP
Syntax
：
[STATe
：
]STOP {
；

NL}
Purpose
：
Set for Load to stop the test
7 6 5 4 3 2 1 0
Over Current Protection (OPP
)
Over Voltage Protection (OVP
)
Over Current Pttion (OCP
)
bit 7
bit 0
Over Temperature Protection (OTP)