BS61M
series
~58~
Support software for this motherboard may be supplied either on a CD-
ROM or on diskettes. In either case, all the support programs are stored in
separate folders, which makes it easier to find a particular program.
After you have finished setting up the hardware, you will need to install
the software that accompanies your motherboard to enjoy all its advanced
features. Remember, though, that your particular motherboard may not
contain all the same advanced features as other models. To determine what
special functions are available with your motherboard, please refer to section
1.2 of this manual). The support software bundled with your motherboard
should contain:
!
SiS 620 VGA & IDE drivers for Win 98/Win95/NT.
!
ESS solo-1 Audio driver and AP
!
PC-Cillin 98 Software.
Note: Please refer to the PC-Cillin 98 installation guide for instructions on
installing that particular program.
4.1
Installing SiS 620 VGA driver
Note: After you have finished setting up your hardware, reboot your
computer and install the standard VGA driver (if you are using a
plug-and-play operating system, it will likely install the driver
automatically). After the standard VGA driver has been installed,
reboot the computer again, and perform the following steps to
install the SiS 620 VGA driver.
1.
Turn on your PC, load Windows 95/98 and then insert the “CD title”
into your CD-ROM drive.
Chapter 4
Software Setup